Given the output from the show ip eigrp topology command, which router is the feasible successor?

Refer to the exhibit.

image050 - 
Given the output from the show ip eigrp topology command, which router is the feasible successor?
Given the output from the show ip eigrp topology command, which router is the feasible successor?
A. 10.1.0.1 (Serial0), from 10.1.0.1, Send flag is 0x0
Composite metric is (46152000/41640000), Route is Internal
Vector metric:
Minimum bandwidth is 64 Kbit
Total delay is 45000 Microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 2
B. 10.0.0.2 (Serial0.1), from 10.0.0.2, Send flag is 0x0
Composite metric is (53973248/128256), Route is Internal
Vector Metric:
Minimum bandwidth is 48 Kbit
Total delay is 25000 Microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 1
C. 10.1.0.3 (Serial0), from 10.1.0.3, Send flag is 0x0
Composite metric is (46866176/46354176), Route is Internal
Vector metric:
Minimum bandwidth is 56 Kbit
Total delay is 45000 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 2
D. 10.1.1.1 (Serial0.1), from 10.1.1.1, Send flag is 0x0
Composite metric is (46763776/46251776), Route is External
Vector metric:
Minimum bandwidth is 56 Kbit
Total delay is 41000 microseconds
Reliability is 255/255
Load is 1/255
Minimum MTU is 1500
Hop count is 2

Answer: B

Which two Cisco IOS commands, used in troubleshooting, can enable debug output to a remote location? (Choose two)

Which two Cisco IOS commands, used in troubleshooting, can enable debug output to a remote location? (Choose two)
A. no logging console
B. logging host ip-address
C. terminal monitor
D. show logging | redirect flashioutput.txt
E. snmp-server enable traps syslog

Answer: BC

Which three statements about IPv6 address fd14:920b:f83d:4079::/64 are true? (Choose three)

Which three statements about IPv6 address fd14:920b:f83d:4079::/64 are true? (Choose three)
A. The subnet ID is 14920bf83d
B. The subnet ID is 4079
C. The global ID is 14920bf83d
D. The address is a link-local address
E. The global ID is 4079
F. The address is a unique local address

Answer: BCF

Which action can you take to correct the problem?

Afar you apply the given configuration to R1, you notice that it failed to enable OSPF
Which action can you take to correct the problem?

image022 - 
Which action can you take to correct the problem?
A. Configure a loopback interface on R1
B. Enable IPv6 unicast routing on R1.
C. Configure an IPv4 address on interface F0/0.
D. Configure an autonomous system number on OSPF.

Answer: B

Which reason for the problem is most likely true?

Refer to the exhibit:

image055 - 
Which reason for the problem is most likely true?
After you apply the give configurations to R1 and R2 you notice that OSPFv3 fails to start.
Which reason for the problem is most likely true?
A. The area numbers on R1 and R2 are mismatched
B. The IPv6 network addresses on R1 and R2 are mismatched
C. The autonomous system numbers on R1 and R2 are mismatched
D. The router ids on R1 and R2 are mismatched

Answer: A