Customer Requirements:

Customer Requirements:
You have been tasked with creating a vSphere 6.x data center design for an organization. The organization is looking to virtualize their physical email application. The company has provided a list of requirements that must be included in the design:
– E-mail database is replicated between two servers at a logical level, with no shared disk configurations.
– E-mail databases meet corporate criteria for LUN provisioning, and must reside directly on storage array.
– Operating system disks do not meet corporate requirements for LUN provisioning, and per policy should not share the same VMFS storage location for redundancy reasons.
– Internal users currently point to three Client Access Servers for load balancing.
– External users currently point to three Web Client Access Servers for load balancing.
– Customer requires discrete hardware to provide security between internal servers and externally available servers, as well as between externally available servers, and client connections from offsite.
Design Requirements:
Create a solution that shows the service dependencies required for virtualizing the email application, including:
– All required storage for Mail DB VM(s) only
– All required network and security connection(s)
– All required virtual machine(s)
– All required user(s)
Place all items in required container(s). Connect VMFS datastore(s) to required virtual machine(s). Place disk(s) over the required storage type(s). Connect firewall(s) to container(s).

image047 - Customer Requirements:

image049 - Customer Requirements:

image051 - Customer Requirements:

image053 - Customer Requirements:

image055 - Customer Requirements:

image057 - Customer Requirements:

image059 - Customer Requirements:

image061 - Customer Requirements:

image063 - Customer Requirements:

image065 - Customer Requirements:

image067 - Customer Requirements:

image069 - Customer Requirements:

image071 - Customer Requirements:

image073 - Customer Requirements:

Answer:
See the solution below
Check below for answer solution

image074 - Customer Requirements:

image055 - Customer Requirements:

image057 - Customer Requirements:

image065 - Customer Requirements:

image075 - Customer Requirements:

image076 - Customer Requirements:

image077 - Customer Requirements:

DRAG DROP

DRAG DROP
You have been tasked with creating a vSphere 6.x data center design for an organization. The organization is evaluating various design options and their impact on the design. For each design option, determine the design characteristic that would be affected by utilizing the option.
Match each Design Option on the left to the Characteristic on the right by dragging the red button (O1-O5) over the text of the appropriate Characteristic.
NOTE: Design Options can be mapped to more than one Characteristic or none at all.

image162 - DRAG DROP

Answer:

image164 - DRAG DROP

DRAG DROP

DRAG DROP
You have been tasked with creating a vSphere 6.x data center design for an organization. The organization has provided a number of requirements, resulting in a preliminary vSphere cluster design shown in the Scenario. The organization has purchased additional servers configured with large amounts of resources (i.e. CPU, RAM) that could be integrated into the cluster design. Consider each vSphere cluster design and determine the benefit of adding additional servers to the design.

image182 - DRAG DROP
Match the Action on the left by dragging the red buttons (A1-A3) over the text of the corresponding Effect.
NOTE: Actions taken might have more than one Effect on the cluster design.

image184 - DRAG DROP

Answer:

image186 - DRAG DROP

DRAG DROP

DRAG DROP
You have been tasked with creating a vSphere 6.x center design for an organization. The organization is currently evaluating vSphere network technologies that can be utilized with their existing infrastructure. Evaluate each statement provided through requirements gathering and determine the network technologies that can be used to meet that requirement. The technology(s) chosen should be limited to what is needed to meet, but not exceed, the given requirement.
Match Statements on the left by dragging the red buttons (S1-S6) over the text of the appropriate Solution.
NOTE: Statements can match more than one Solution or none at all.

image170 - DRAG DROP

Answer:

image172 - DRAG DROP

SATA drives in RAID 5 configuration

SATA drives in RAID 5 configuration
Secondary Site:
– 3 ESXi hosts in a single cluster
– A Fiber Channel storage array of the same type and with the same configuration as that of the production site
The details of the organization’s SLAs include:
– Gold: Maximize read/write storage performance and provide automated offsite recovery with an RPO < 15 minutes.
– Silver: Maximize read performance and provide automated offsite recovery with an RPO from 15 minutes to 24 hours.
– Bronze: No performance requirement. Onsite recovery with no specific RPO.
The organization has a number of web-based multi-tier applications that are governed by their SLAs. The workloads in these applications and their SLA assignments include:
– Database workloads C Gold
– Application workloads C Silver
– Web workloads C Bronze
Note that Web servers only contain static information that is site specific.
Design Requirements:
Create a design that incorporates the required elements:
– Place an SLA container for each of the appropriate SLAs into the appropriate sites.
– Place the appropriate storage type(s) for each SLA into the SLA container.
– Place the appropriate workload(s) into the SLA containers.
– Place the appropriate BCDR components into the SLA containers.
– Connect any replicated storage between the two sites using the appropriate replication connector.

image121 -  SATA drives in RAID 5 configuration

image123 -  SATA drives in RAID 5 configuration

image125 -  SATA drives in RAID 5 configuration

image127 -  SATA drives in RAID 5 configuration

image129 -  SATA drives in RAID 5 configuration

image131 -  SATA drives in RAID 5 configuration

image133 -  SATA drives in RAID 5 configuration

image135 -  SATA drives in RAID 5 configuration

image137 -  SATA drives in RAID 5 configuration

image139 -  SATA drives in RAID 5 configuration

image141 -  SATA drives in RAID 5 configuration

image143 -  SATA drives in RAID 5 configuration

image145 -  SATA drives in RAID 5 configuration

image147 -  SATA drives in RAID 5 configuration

Answer:
See the solution below
Check below for answer solution
Primary

image148 -  SATA drives in RAID 5 configuration

image149 -  SATA drives in RAID 5 configuration

image137 -  SATA drives in RAID 5 configuration

image141 -  SATA drives in RAID 5 configuration

image145 -  SATA drives in RAID 5 configuration

image150 -  SATA drives in RAID 5 configuration

image151 -  SATA drives in RAID 5 configuration

image152 -  SATA drives in RAID 5 configuration

image139 -  SATA drives in RAID 5 configuration
Secondary

image153 -  SATA drives in RAID 5 configuration

image154 -  SATA drives in RAID 5 configuration

image143 -  SATA drives in RAID 5 configuration

image147 -  SATA drives in RAID 5 configuration

Customer Requirements:

Customer Requirements:
You have been tasked with creating a vSphere 6.x data center design for an organization. The organization has produced two 24 port FC switches, and Asymmetrical Active/Active storage array (2 storage Processors with 4 ports each) and 22 ESXi Hosts with 2 dual port HBAs in each. Due to budgetary constraints, the organization cannot purchase anymore equipment. They have provided the following requirements:
– The existing Fibre Channel (FC) Asymmetrical Active/Active Array and FC switches must be used.
– No single point of failure to any datastore.
– Configuration must provide failover and load balancing.
– The customer requires a solution that will accommodate virtual machines with three different I/O load requirements:
– Static web virtual machines
– Critical application virtual machines.
– Object storage for their database virtual machines.
Design Requirements:
Create a logical design that be applied to each of the ESXi Hosts. The design should meet, but not exceed the customer’s requirements and should include:
– All required hardware
– All required resources
Place the required datastore(s) in the storage array(s). Connect the storage processor(s) to the storage array(s). Connect the switch(es) to the storage processor(s) and HBA(s). Connect the ESXi host to the HBA(s) and Path Selection Policies.

image006 - Customer Requirements:

image008 - Customer Requirements:

image010 - Customer Requirements:

image012 - Customer Requirements:

image014 - Customer Requirements:

image016 - Customer Requirements:

image018 - Customer Requirements:

image020 - Customer Requirements:

image022 - Customer Requirements:

image024 - Customer Requirements:

image026 - Customer Requirements:

image028 - Customer Requirements:

image030 - Customer Requirements:

image032 - Customer Requirements:

image034 - Customer Requirements:

image036 - Customer Requirements:

image038 - Customer Requirements:

Answer:
See the solution below
Check below for answer solution

image039 - Customer Requirements:

image040 - Customer Requirements:

image041 - Customer Requirements:

image042 - Customer Requirements:

image043 - Customer Requirements:

image044 - Customer Requirements:

image045 - Customer Requirements:

Customer Requirements:

Customer Requirements:
You have been tasked with creating a vSphere 6.x data center design for an organization. The organization wants three defined virtual machine performance levels:
– Gold Tier C High workload VMs
– Silver Tier C Medium workload VMs
– Bronze Tier C Development workload VMs
The organization has eight ESXi hosts that can be used in the design. Five of the hosts are older “medium performance” hosts, while the last 3 are newer “high performance” hosts that provide better resources when compared to the other hosts. The organization has provided a list of requirements that the design must meet:
– Gold Tier virtual machines should run only on high performance servers, unless no high performance servers are available. They should also be allocated 75% of overall available resources regardless of placement.
– Silver Tier virtual machines should run only on medium performance servers, unless no medium performance servers are available. They should also be allocated 25% of overall available resources regardless of placement.
– Bronze Tier virtual machines should run only on medium performance servers. They should also receive a 35% subset of resources from those allocated to the Silver Tier.
Design Requirements:
Create a logical design that shows resource allocation and cluster policies needed to meet the customer’s requirements. The design should include:
– All required server(s)
– All required resource(s)
Place host(s) in the required DRS group(s). Place virtual machines in the appropriate resource pool(s). Connect parent to child resource pool connector(s) where needed. Connect the appropriate affinity connector(s) where needed.

image083 - Customer Requirements:

image085 - Customer Requirements:

image087 - Customer Requirements:

image089 - Customer Requirements:

image091 - Customer Requirements:

image093 - Customer Requirements:

image095 - Customer Requirements:

image097 - Customer Requirements:

image099 - Customer Requirements:

image101 - Customer Requirements:

image103 - Customer Requirements:

image105 - Customer Requirements:

image107 - Customer Requirements:

image109 - Customer Requirements:

image111 - Customer Requirements:

image113 - Customer Requirements:

Answer:
See the solution below
Check below for answer solution

image085 - Customer Requirements:

image114 - Customer Requirements:

image115 - Customer Requirements:

image095 - Customer Requirements:

image097 - Customer Requirements:

image099 - Customer Requirements:

image105 - Customer Requirements:

image109 - Customer Requirements:

image113 - Customer Requirements:

DRAG DROP

DRAG DROP
You have been tasked with creating a vSphere 6.x data center design for an organization. The organization has provided information via requirements gathering. Evaluate each statement and determine if the requirement is functional or non-functional.
Match Requirements on the left by dragging the red buttons (R1-R9) over the text of the appropriate Classification.

image178 - DRAG DROP

Answer:

image180 - DRAG DROP