Which statement describes the key security service that is provided by the TLS proxy function on a Cisco ASA appliance?

Which statement describes the key security service that is provided by the TLS proxy function on a Cisco ASA appliance?
A. It enables internal phones to communicate with the external phones without encryption.
B. It only applies to encrypted voice calls where both parties utilize encryption,
C. It only provides internetworking to ensure that external IP phone traffic is encrypted, even if the rest of the system is unencrypted.
D. It protects Cisco Unified Communications Manager from rogue soft clients and attackers on the data VLAN
E. It manipulates the call signalling to ensure that all media is routed via the adaptive security appliance.

Answer: E

What is the status of this user in the Unified CM database at 1:00 am on March 2nd 2014?

Tom Lee is an active user in a Cisco Unified CM deployment with fully functional LDAP synchronization and authentication to an Active Directory. Daily resynchronization is set at 11:00 pm. At 8:00 am on March 1st 2014 this user was deleted from AD.
What is the status of this user in the Unified CM database at 1:00 am on March 2nd 2014?
A. active
B. inactive
C. permanently deleted awaiting
D. authorization
E. delete pending

Answer: B

Based on the information displayed, which behaviour can be determined from the exhibit?

Refer to the exhibit.

image192 - 
Based on the information displayed, which behaviour can be determined from the exhibit?
An engineer is analysing a SIP call between CUCM on the left and CUBE on the right.
Based on the information displayed, which behaviour can be determined from the exhibit?
A. The mid-call re-invite negotiated for call hold/resume supplementary service
B. The call has interworking issues where user is not experiencing audio
C. The midcall-signaling block is configured on Cisco Unified border element so re-invites are not consumed
D. The call is terminated because 200 Ok messages are not arriving to Cisco Unified Communications Manager

Answer: A

Which description of the cause is true?

Multiple users report that when they try to login to Cisco Unified Communications Extension Mobility Manager this error is retrieved?
"Error:-[26] Busy, please try again"
Which description of the cause is true?
A. The intracluster Multiple Login Behaviour is set to Multiple Logins Not Allowed.
B. the Validate IP Address parameter is set to false, so the IP is not found in the trust list.
C. The number of concurrent log in and logout requests is higher than the Maximum Concurrent Requests service parameter.
D. the Extension Mobility Cache size has been lowered to 1000 and no more logins are allowed beyond this number.

Answer: C
Explanation:
Error: – [26] – Busy, please try again
Resolution: ­
Check whether the number of concurrent login/logout requests is greater than the Maximum Concurrent requests service parameter. If so, lower the number of concurrent requests.
To verify the number of concurrent login/logout requests, use Cisco Unified Communications Manager Cisco Unified Real-Time Monitoring Tool to view the Requests In Progress counter in the Extension Mobility object.

Which two statements about virtual SNR in Cisco Unified Communications Manager Express are true? (Choose two.)

Which two statements about virtual SNR in Cisco Unified Communications Manager Express are true? (Choose two.)
A. The SNR DN must be configured as SCCP.
B. Calls cannot be pulled back from the phone associated with the DN.
C. Ephone hunt groups are supported.
D. The virtual SNR DN must be assigned to an ephone.
E. Music on hold is supported for trunk and line side calls.

Answer: AB
Explanation:
SCCP: Configuring a Virtual SNR DN
To configure a virtual SNR DN on Cisco Unified SCCP IP phones, perform the following steps. Prerequisites
Cisco Unified CME 9.0 or a later version.
Restrictions
Virtual SNR DN only supports Cisco Unified SCCP IP phone DNs.
Virtual SNR DN provides no mid-call support. Mid-calls are either of the following:
– Calls that arrive before the DN is associated with a registered phone and is still present after the DN is associated with the phone.
– Calls that arrive for a registered DN that changes state from registered to virtual and back to registered. Mid-calls cannot be pulled back, answered, or terminated from the phone associated with the DN.
State of the virtual DN transitions from ringing to hold or remains on hold as a registered DN. http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmesnr.html#38281

DRAG DROP

DRAG DROP

image036 - DRAG DROP

Answer:

image038 - DRAG DROP
Explanation:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmsys/CUCM_BK_CD2F83FA_00_cucm-system-guide-90/CUCM_BK_CD2F83FA_00_system-guide_chapter_0101111.pdf
Set Up Digit Transformations for URI Dialing If your network applies digit transformation patterns to calling party directory numbers and you are implementing URI dialing across clusters, you can apply calling party transformation patterns against the Inbound Call Settings of the phone or device pool. This is required because Cisco Unified Communications Manager cannot perform calling party transformations if the calling party transformation is applied based on the called party directory number or pattern. For intercluster calls, you can apply a digit transformation pattern against a Calling Search Space (CSS) and apply that CSS transformation to the Inbound Call Settings for the phone or device pool. Before routing the call, whether the dialed number is a directory URI or a directory number, Cisco Unified Communications Manager applies the transformation pattern to the calling directory number. For intracluster calls, if you don’t want the calling
party transformation to be applied for calls that remain in the local cluster, you can also apply a CSS transformation pattern that strips the digits that were added by the Inbound Call Settings and apply that pattern to the Outbound Call Settings for the phone or device pool. For Cisco Unified Communications Manager System Guide, Release 9.0(1) 9 URI Dialing Set Up Digit Transformations for URI Dialing the device pool, the Calling Party Transformation CSS for outbound calls appears under Device Mobility Related Information. To apply calling party digit transformations when URI dialing is implemented, do the following: Procedure
Step 1 In Cisco Unified CM Administration, chooseCall Routing > Class of Control > Partition and create a new partition (for example, Change Calling Party XXXX to 8XXXXXXX).
Step 2 Choose Call Routing > Class of Control > Calling Search Space and do the following:
• Create a calling search space (for example, Change Calling Party XXX to 8XXXXXXX).
• In the Available Partitions list box, add the newly created partition (for example, Change Calling Party XXXX to 8XXXXXXX).
Step 3 In Cisco Unified CM Administration, choose Call Routing > Transformation > Transformation Pattern > Calling Party Transformation Pattern.
• Create a transformation pattern (for example, XXXX)
• Set the partition to the partition that you created in the previous steps (for example Change CallingParty XXXX to 8XXXXXXX).
• Set the Calling Party Transformation Mask to the desired mask (for example, 8265XXXX).
Step 4 In Cisco Unified CM Administration, choose Call Routing > Class of Control > Partition and create a new partition (for example, Change Calling Party 8XXXXXXX to XXXX).
Step 5 ChooseCall Routing > Class of Control > Calling Search Space and do the following:
• Create a calling search space (for example, Change Calling Party 8XXXXXXX to XXXX).
• In the Available Partitions list box, add the newly created partition (for example, Change Calling Party 8XXXXXXX to XXXX).
Step 6 In Cisco Unified CM Administration, choose Call Routing > Transformation > Transformation Pattern > Calling Party Transformation Pattern.
• Create a transformation pattern (for example, 8265XXXX)
• Set the partition to the partition that you created in the previous steps (for example, Change Calling Party 8XXXXXXX to XXXX).
• Set the Calling Party Transformation Mask to the desired mask (for example, XXXX).
Step 7 To assign your transformation patterns to an individual phone, choose Device > Phone and apply the following settings to the phone:
• For patterns that apply to inbound settings, choose the CSS that contains the pattern from the Calling Party Transformation CSS drop-down list box that appears under Inbound Calls. Cisco Unified Communications Manager System Guide, Release 9.0(1) 10 URI Dialing Set Up Digit Transformations for URI Dialing
• For patterns that apply to outbound settings, choose the CSS that contains the pattern from the Calling Party Transformation CSS drop-down list box that appears under Outbound Calls.
Step 8 Click Save. You can also apply the digit transformation patterns to a device pool by choosing System > Device Pool from Cisco Unified CM Administration. For device pool configuration, the Calling Party Transformation CSS for outbound calls appears under Device Mobility Related Information.

What is the root cause?

A CUCM administrator has configured a Cisco IOS CFB using a Cisco 2921 router and encounters an issue.

image142 - 
What is the root cause?
What is the root cause?
A. The CFB sent the registration message twice
B. The CFB protocol version is not compatible with this CUCM version
C. CUCM has not received the first keepalive message from CFB
D. Device type in CUCM does not match the one configured on Cisco IOS
E. CUBE_CFB name was entered incorrectly in CUCM database

Answer: D

How many RTP streams exist on a network when a Cisco Unified Contact Centre Express agent is engaged in a call that is being silently monitored and recorded? (Choose two.)

How many RTP streams exist on a network when a Cisco Unified Contact Centre Express agent is engaged in a call that is being silently monitored and recorded? (Choose two.)
A. 8
B. 3
C. 5
D. 6
E. 4

Answer: D

How many inbound calls can be handled simultaneously between ephone 1 and ephone 2 before a user busy tone is returned?

How many inbound calls can be handled simultaneously between ephone 1 and ephone 2 before a user busy tone is returned?

image130 - How many inbound calls can be handled simultaneously between ephone 1 and ephone 2 before a user busy tone is returned?
A. 6
B. 7
C. 8
D. 9
E. 11

Answer: A