What should you do?

You have a server named Server1 that runs Windows Server 2012 R2. Each day, Server1 is backed up fully to an external disk.
On Server1, the disk that contains the operating system fails.
You replace the failed disk.
You need to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (WindowsRE).
What should you do?
A. Run the Start-WBVolumeRecovery cmdlet and specify the -backupset parameter
B. Run the Get-WBBareMetalRecovery cmdlet and specify the -policy parameter
C. Run the wbadmin.exe start recovery command and specify the -recoverytarget parameter
D. Run the wbadmin.exe start sysrecovery command and specify the -backuptarget parameter

Answer: D

Which tool should you use before you start the DFS Replication service on DC10?

Your company deploys a new Active Directory forest named contoso.com. The first domain controller in the forest runs Windows Server 2012 R2. The forest contains a domain controller named DC10.
On DC10, the disk that contains the SYSVOL folder fails.
You replace the failed disk. You stop the Distributed File System (DFS) Replication service. You restore the SYSVOL folder.
You need to perform a non-authoritative synchronization of SYSVOL on DC10.
Which tool should you use before you start the DFS Replication service on DC10?
A. Dfsgui.msc
B. Ultrasound
C. Ldp
D. Replmon

Answer: B
Explanation:
Verify that replication is working as designed. Download the Ultrasound Monitoring and Troubleshooting Tool for File Replication Services from the Microsoft Download Center to verify the healgt of the current FRS environment.

What should you modify first?

Your network contains several servers that run Windows Server2012 R2 and client computers that run Windows 8.1.
You download several signed Windows PowerShell scripts from the Internet.
You need to run the PowerShell scripts on all of the servers and all of the client computers
What should you modify first?
A. the environment variables on all client computers
B. the execution policy on all of the servers
C. the execution policy on all of the client computers
D. the environment variables on all of the servers

Answer: C
Explanation:
The default execution policy of Windows Server 2012 is RemoteSigned meaning that as long as a valid signature is used on the scripts, they will run. However, the client computers have a default execution policy of restricted meaning that no scripts will run in PowerShell whatsoever, so this would have to be changed before the scripts could be executed on the client computers.

Which of the following situations would you use AD LDS?

Which of the following situations would you use AD LDS?
A. A DMZ
B. Standard private network
C. You require the use of Group Policy
D. You require the use of Organizational Units

Answer: A
Explanation:
A DMZ (Demilitarized Zone) such as a web server is usually the classic choice for using AD LDS (Active Directory Lightweight Directory Service)

What should you identify?

DRAG DROP
You have a file server named Server1 that runs Windows Server 2012 R2.
The folders on Server1 are configured as shown in the following table.

image648 - What should you identify?
A new corporate policy states that backups must use Microsoft Online Backup whenever possible. You need to identify which technology you must use to back up Server1. The solution must use Microsoft Online Backup whenever possible.
What should you identify? To answer, drag the appropriate backup type to the correct location or locations. Each backup type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

image650 - What should you identify?

Answer:

image652 - What should you identify?

What should you configure?

Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.

image004 - 
What should you configure?
You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization

Answer: I
Explanation:
http://www.altaro.com/hyper-v/vss-crash-consistent-vs-Application-consistent-vss-backupspost-2- of-2/ Backup
Operations in Hyper-V
No
VSS Writer Available?
In some cases, you need an Application-consistent backup but there is no VSS writer available. One example of this is MySQL. Hyper-V backups of virtual machines containing MySQL will always result in either a crashconsistent or an image-level backup. For MySQL, the latter is probably acceptable as MySQL doesn’t perpetually expand the log file. However, if you’re using MySQL within a VSS-aware VM, then a Hyper-Vbased backup tool is going to take a crash-consistent backup. MySQL (like any other database system) isn’t always recoverable from a crash-consistent backup; tool is going to take a crash-consistent backup. MySQL (like any other database system) isn’t always recoverable from a crash-consistent backup; even when recovery is possible, it may be painful. MySQL is just one example; any number of line-of-business Applications could tell a similar tale. In the case of MySQL, one solution is to find a guest-level backup Application that is MySQL- aware and can back it up properly. For Applications for which no backup Application has a plug-in, you may need to have pre- and post-backup scripts that stop services or close Applications. If brief downtime is acceptable, you can disable the Backup item in Hyper-V Integration Services, thereby forcing Hyper-V to save
the state of the VM during backup. This technique results in an image-level backup and can be used on any Application that doesn’t have a VSS writer.

Which two settings should you configure?

Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs WindowsServer 2012 R2. Server1 is configured as a Network Policy Server (NPS) server and as a DHCP server.
You need to ensure that only computers that send a statement of health are checked for Network Access Protection (NAP) health requirements.
Which two settings should you configure? (Each correct answer presents part of the solution. Choose two.)
A. The NAS Port Type constraints
B. The MS-Service Class conditions
C. The Health Policies conditions
D. The NAP-Capable Computers conditions
E. The Called Station ID constraints

Answer: C, D
Explanation:
The NAP-Capable ensures that the machine is able to send a statement of health, and the Health Policy tells it which policy to evaluate against.

What should you do first?

Your network contains an Active Directory domain named adatum.com.
You have a standard primary zone named adatum.com.
You need to provide a user named User1 the ability to modify records in the zone.
Other users must be prevented from modifying records in the zone.
What should you do first?
A. Run the Zone Signing Wizard for the zone
B. From the properties of the zone, change the zone type
C. Run the new Delegation Wizard for the zone
D. From the properties of the zone, modify the Start Of Authority (SOA) record

Answer: B

What should you do?

Your network contains an Active Directory forest named contoso.com.
Users frequently access the website of an external partner company.
The URL of the website is http://partners.adatum.com.
The partner company informs you that it will perform maintenance on its Web server and that the IP addresses of the Web server will change.
After the change is complete, the users on your internal network report that they fail to access the website.
However, some users who work from home report that they can access the website.
You need to ensure that your DNS servers can resolve partners.adatum.com to the correct IP address immediately.
What should you do?
A. Run dnscmd and specify the CacheLockingPercent parameter
B. Run Set-DnsServerGlobalQueryBlockList
C. Run ipconfig and specify the Renew parameter
D. Run Set-DnsServerCache

Answer: D

What should you do?

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Remote Access server role installed.
DirectAccess is implemented on Server1 by using the default configuration.
You discover that DirectAccess clients do not use DirectAccess when accessing websites on the Internet.
You need to ensure that DirectAccess clients access all Internet websites by using their DirectAccess connection.
What should you do?
A. Configure a DNS suffix search list on the DirectAccess clients.
B. Enable the Route all traffic through the internal network policy setting in the DirectAccess Server Settings Group Policy object (GPO).
C. Configure DirectAccess to enable force tunneling.
D. Disable the DirectAccess Passive Mode policy setting in the DirectAccess Client Settings Group Policy object (GPO).

Answer: C