What should you configure?

Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.

image004 - 
What should you configure?
You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization

Answer: I
Explanation:
http://www.altaro.com/hyper-v/vss-crash-consistent-vs-Application-consistent-vss-backupspost-2- of-2/ Backup
Operations in Hyper-V
No
VSS Writer Available?
In some cases, you need an Application-consistent backup but there is no VSS writer available. One example of this is MySQL. Hyper-V backups of virtual machines containing MySQL will always result in either a crashconsistent or an image-level backup. For MySQL, the latter is probably acceptable as MySQL doesn’t perpetually expand the log file. However, if you’re using MySQL within a VSS-aware VM, then a Hyper-Vbased backup tool is going to take a crash-consistent backup. MySQL (like any other database system) isn’t always recoverable from a crash-consistent backup; tool is going to take a crash-consistent backup. MySQL (like any other database system) isn’t always recoverable from a crash-consistent backup; even when recovery is possible, it may be painful. MySQL is just one example; any number of line-of-business Applications could tell a similar tale. In the case of MySQL, one solution is to find a guest-level backup Application that is MySQL- aware and can back it up properly. For Applications for which no backup Application has a plug-in, you may need to have pre- and post-backup scripts that stop services or close Applications. If brief downtime is acceptable, you can disable the Backup item in Hyper-V Integration Services, thereby forcing Hyper-V to save
the state of the VM during backup. This technique results in an image-level backup and can be used on any Application that doesn’t have a VSS writer.

Leave a Reply

What should you configure?

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Remote Desktop Session Host role service installed. The computer account of Server1 resides in an organizational unit (OU) named OU1. You create and link a Group Policy object (GPO) named GPO1 to OU1.
GPO1 is configured as shown in the exhibit. . (Click the Exhibit button.)
*Exhibit is Missing*
You need to prevent GPO1 from applying to your user account when you log on to Server1. GPO1 must apply to every other user who logs on to Server1.
What should you configure?
A. Security Filtering
B. VMI Filtering
C. Block Inheritance
D. Item-level targeting

Answer: A
Explanation:
Security filtering is a way of refining which users and computers will receive and apply the settings in a Group Policy object (GPO). Using security filtering, you can specify that only certain security principals within a container where the GPO is linked apply the GPO. Security group filtering determines whether the GPO as a whole applies to groups, users, or computers; it cannot be used selectively on different settings within a GPO.
Incorrect:
Not B: Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group Policy objects (GPOs) based on attributes of the target computer.
Reference: Security filtering using GPMC
https://technet.microsoft.com/sv-se/library/Cc781988(v=WS.10).aspx

Leave a Reply

What should you configure?

Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.

image046 - 
What should you configure?
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization

Answer: K
Explanation:
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335

Leave a Reply

What should you configure?

Your network contains an Active Directory domain named contoso.com. The domain contains an organizational unit (OU) named AHServers.OU.
You create and link a Group Policy object (GPO) named GP01 to AllServer.OU.
GPO1 is configured as shown in the exhibit. (Click the Exhibit button.)

image433 - 
What should you configure?
You need to ensure that GPO1 only applies to servers that have Remote Desktop Services (RDS) installed.
What should you configure?
A. Item-level targeting
B. WMI Filtering
C. Security Filtering
D. Block Inheritance

Answer: B
Explanation:
Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group Policy objects (GPOs) based on attributes of the target computer.
When a GPO that is linked to a WMI filter is applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false, the GPO is not applied. If the WMI filter evaluates to true, the GPO is applied.

Leave a Reply

What should you configure?

You are the quality manager for your company.
You need to configure the system to allow quality testing of some items from every purchase order received.
What should you configure?
A. quality test group
B. quality association
C. manual quality order
D. quality test

Answer: D

Leave a Reply

What should you configure?

Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.

image004 - 
What should you configure?
You install a network monitoring application on VM2.
You need to ensure that all of the traffic sent to VM3 can be captured on VM2.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization

Answer: J
Explanation:
http://technet.microsoft.com/en-us/library/jj679878.aspx#bkmk_portmirror
What’s New in Hyper-V Virtual Switch
Port Mirroring
With Port Mirroring, traffic sent to or from a Hyper-V Virtual Switch port is copied and sent to a mirror port.
There are a range of applications for port mirroring an entire ecosystem of network visibility companies exist that have products designed to consume port mirror data for performance management, security analysis, and network diagnostics. With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the switch port that receives copies of all the traffic.
The following examples configure port mirroring so that all traffic that is sent and received by both MyVM and
MyVM2 is also sent to the VM named MonitorVM.
Set-VMNetworkAdapter VMName MyVM PortMirroring Source
Set-VMNetworkAdapter VMName MyVM2 PortMirroring Source
Set-VMNetworkAdapter VMName MonitorVM PortMirroring Destination

Leave a Reply

What should you configure?

Your network contains two DNS servers named DNS1 and DNS2 that run Windows Server 2012 R2. DNS1 has a primary zone named contoso.com. DNS2 has a secondary copy of the contoso.com zone. You need to log the zone transfer packets sent between DNS1 and DNS2.
What should you configure?
A. Monitoring from DNS Manager
B. Logging from Windows Firewall with Advanced Security
C. A Data Collector Set (DCS) from Performance Monitor
D. Debug logging from DNS Manager

Answer: D
Explanation:
Debug logging allows you to log the packets sent and received by a DNS server. Debug logging is disabled by default, and because it is resource intensive, you should only activate it temporarily when you need more specific detailed information about server performance.
Reference: Active Directory 2008: DNS Debug Logging Facts.

Leave a Reply